|
Fiber Laser Marking System
Accuwrite-F series involves Fiber laser technology. The system consists of Pulsed Fiber Laser with scan head, PC with control board, power supply, software, and a laser safety enclosure with an motorized Z axis.
All SIL Laser Markers are monitored by a Smart Machine Control interface (SMCI technology introduced by SIL) capable of Communicating for any fault reported directly to our service center (Internet connectivity needed for this feature at site of machine installation)
The Accuwrite F series can be configured for many different types of production setup and it is possible to have online marking or Mark on the fly options.
Advantage
- Highest wall plug efficiency compared to other laser technology available
- Power up to 20 watt in CW and Pulsed
- High Beam Quality (TEM00 mode M2 = 1.6)
- Diode life > 50000 hrs.
- High repetition rate
- Very stable and consistent repeatability
- Maintenance free operation with 3 years of unlimited usage warranty.
- Very small footprint
- No water-cooling.
| Model | Accuwrited F10
| Accuwrited F20
| | Laser Type | Pulsed Fiber Laser | Pulsed Fiber Laser
| Energy per pulse
| 1mj max
| 2 mj max
| Laser Power
| 10 watt
| 20 watt
| | Central Emmision wavelength | 1064 nm
| | Beam diameter after collimation | 8 mm
| | Pulse Frequency | 20kHz-50kHz
| | Beam Quality M2 | 1.6
| | Power Tunability | 10 - 100%
| | Marking Area | 100 x 100 mm, 160 x 160 mm, 254 X 254 mm, 300 X 300mm
| Standard system comes with 100 x 100 mm marking field
| | Marking Speed | 500 characters/sec. (All characters of 1mm height and width)
| | Writing Speed | 3000 mm/sec
| | Marking Repeatability | +/-25 microns or better
| | Operating System | Windows XP, Windows 2000
| | Z-axis with Auto Focus | Programmable
upto 300 mm height components can be marked. All laser marking machines
from SIL have a unique Auto focus feature allowing to change the parts
of different heights and precision placing again in the marking field
area with 1 key input.
| | Software | Windows
XP/Windows 2000 based software with features for Automation,
Circumferential marking, Bar-coding, 2 D bar-coding, Z-axis focusing,
user access control, and lifetime free upgrade. Online part simulation
prior to marking. Various formats like HPGL, PLT, Windows BMP, WMF,
JPEG, DXF, and many more can be imported directly and marked.
| | Operating Power | 230 VAC 5 Amps Maximum
| | Power Consumption | 250 watts Maximum (including all subsystems)
| | Machine Size | 1400 mm x 800 mm x 500 mm |
|
